AllOutdoor Review – ActionTrax Traction Boards for your Vehicle Kit


If you’re an off-road enthusiast, then you know that getting good traction is key to a successful ride. ActionTrax Traction Boards provide a simple yet effective solution for a safe recovery. In this review, we’ll talk about the features of these boards, and why recovery boards are such an important piece of equipment for any off-roader. Opened to other methods…

Good day everyone and welcome to a new installment of AllOutdoor’s Off-Road and Overlanding series brought to you by onX Offroad–mapping software for all your adventures.

Do you even off-road?

If you’re an off-road enthusiast, then you know that getting good traction is key to a successful ride. That’s where ActionTrax Traction Boards come in – they provide additional traction on the terrain for your tires.

ActionTrax Traction Boards
When you are stuck in soft sand or snow, sometimes all you need is traction.

The recovery boards are also angled so that they provide maximum contact with the ground, giving you more traction when you need it most. And because they’re designed to be used with off-road vehicles, they can take a beating and keep on going. Plus, they’re made from tough, high-density plastic that can withstand all kinds of abuse.

ActionTrax Traction Boards

The biggest advantage of the ActionTrax Traction Boards is their multi-purpose design. Unlike other brands, they are flexible which allows them to flex over and around terrain features (opposed to just being a rigid ramp). While you cannot really use them to “bridge” an obstacle without stacking them, they are less likely to break in the more common use cases.

The sawtooth ends help when digging in sand and snow, and also allow you to more securely plant the boards in the ground under the tire.

ActionTrax Traction Boards
Traction boards need to be placed at an angle for maximum effectiveness. This sometimes requires digging around the tire for better placement.

ActionTrax comes in a variety of color options. I always go with bright orange as I think it makes them easier to find if they get buried. I used to have awesome color-matched desert tan MaxTrax and I cannot tell you how much time I spent hunting for them in soft sand.

ActionTrax Traction Boards
Tan traction boards blend into sand. I like orange because they stand out in sand and snow.

Another great feature of the ActionTrax Traction Boards is their durability. They’re made from a tough, high-density, 100% US-made Dupont polymer that can withstand all kinds of abuse. And because they’re designed to be used with off-road vehicles, they can take a beating (just make sure you don’t “spin out” on them – something you should avoid with any traction board).

Technical Specifications

ActionTrax traction recovery boards are 44.5″ long and 12.875″ wide with a pair weighing under 20lbs, and around 4″ thick when stacked.

  • Length: 44.5″
  • Width: 12.875″
  • Standard height (pair): 3.5″
  • Metal Tooth height (pair): 4.25″
  • Standard weight (pair): 16 lbs
  • Metal Tooth weight (pair): 18 lbs

Quick Link System

While 44.5″ ought to be enough for most situations, there are times you might need to cover more area (any icy patch on a trail for example). The Actiontrax recovery tracks have two slots on either end that allow you to thread large zip ties (they sell ones they dub “X-Treme” Zip Ties) or flex cuffs. You can then link two ActionTrax boards together giving you a longer runway.

Remember, once you get a vehicle moving, you want it to keep moving. Having a way to provide traction over a longer distance allows you to attain traction and keep it over sand, snow, and most rugged terrains. They’ve even been used as a hasty boat ramp (though you need a bunch to make this happen).

Metal Tooth Version

The standard ActionTrax recovery board is a plain purpose-designed Dupont polymer, including the teeth. ActionTrax also sells an “X-Treme” version that comes with pre-installed metal teeth on the first four rows of lugs on both ends.

These metal studs are made with simple stainless steel bolts you can find at most hardware stores. This is a much more effective solution than some kind of proprietary replacement lug and offers supreme traction.

Plus the metal studs are much more aggressive cleats than other boards offer – enough so that you can damage your tread if you spin your tires.

Repairing the Recovery Boards

If you screw up and have excessive wheel spin and destroy the nylon teeth, you’ll find the boards extremely easy to repair. You repair burnt teeth by drilling out the damaged lug with a 1/4 drill bit from the backside. You can clean up any plastic remnants with a sharp tool. Then, just run a 1/4″ bolt (that is 3/4″ long) through the hole.

ActionTrax Traction Boards
You can see the backside of the bolts used as metal lugs. Standard off-the-shelf-hardware. You can also see the aggressive sawtooth design.

While you can use any hardware, nylock nuts and washers are recommended. I’d recommend stainless steel bolts as well since the recovery boards are likely always exposed to the environment.

Recovery Boards Feature List

  • Aggressive sawtooth design on the ends with a ramp shape allowing for easy insertion between tire and ground
  • Ninety-four lugs on the body provide traction in any direction
  • Body has six larger hand holds (big enough for gloves) that make digging, carrying, and positioning easy
  • “Keyhole” cutouts on the ends that provide a mounting point (they accommodate my original MaxTrax mounts
  • Ability to add metal “teeth” in any of the lug positions using off the shelf hardware
  • Optional six-foot nylon webbing leashes can be added allowing you to find the traction board if they get buried
  • 100% made in the US using a proprietary material rated to 50,000lbs GVW and a two-year ActionTrax unconditionally guarantees against breaking
  • Three reinforced beams along the long axis for additional support
  • Additional slots at each end allow you to link multiple ActionTrax using heavy zip ties/flex cuffs

Getting good traction is key to a successful off-road ride, but it can be hard to achieve that without the right equipment.

ActionTrax Traction Boards
Both of our vehicles sporting ActionTrax. Mine are mounted on my Rhino Rack Pioneer Rack. The other set is mounted on a bed rack system

ActionTrax Traction Boards are the perfect way to make sure your tires always have the best grip on the terrain. With their unique design and durable construction, these boards will help you stay on track no matter what kind of surface you’re riding on. Plus they make for an easy repair in the field with common hardware. So, if you’re looking for a way to get better traction on your next off-roading adventure, check out ActionTrax Traction Boards!

ActionTrax Traction Boards
Properly seated boards are ready to provide traction to the tires.

Pick up a set of ActionTrax Traction Boards today and see the difference they make on your next off-road adventure when you need traction. The standard version is around $270 and the “X-Treme” metal tooth version is $350 (prices are for a pair). Visit https://usactiontrax.com/ to learn more.



Source link

Leave a Comment